Cold Storage Doors

A fast roller door with a fabric curtain, variable-frequency drive and infrared safety, built for frequent logistics traffic in ambient and low-temp areas.

Key Features

  • Fast 0.6-1.5 m/s opening for high-frequency traffic
  • Polyester fabric curtain with clear vision panel and wind rating
  • Infrared safety curtain with auto-reverse and de-rail protection
  • Variable-frequency soft start, manual crank for power cuts

Applications

  • Logistics and warehouse high-traffic openings
  • Food, electronics, pharmaceutical and chemical plants
  • Supermarkets and textile/printing facilities
  • Ambient and low-temperature partition openings

Product Overview

The high-speed roll-up door is made for openings with frequent traffic that need to be sealed quickly. It rolls up instead of sliding, so it opens and closes fast enough to replace a strip curtain or air curtain at a busy logistics opening. Versions are available for ambient and low-temperature use.

Structure

The curtain is 0.8 to 1.0 mm high-density polyester fabric in several colors, with a full-width clear vision panel and a 1.5 mm soft transparent section. It is rated for wind force 8 and has a weighted bottom seal that closes against uneven floors; brushes inside the rails cut side draughts. The door rolls onto a top drum inside a 2.0 mm cold-rolled steel frame, finished with automotive paint or powder coating.

Product Features

A variable-frequency drive runs the door from 0.6 to 1.5 m/s with a soft start under PLC control. The three-phase motor is IP55 rated with thermal and overload protection and an encoder limit switch. An infrared safety light curtain reverses the door if anything is in the opening, and a de-rail system protects the curtain. A manual crank handle works during a power cut.

Technical Specifications

Specifications

ItemDetail
Curtain0.8-1.0 mm high-density polyester fabric, multiple colors
Vision panelFull-width clear panel, about 1300-2100 mm high, 1.5 mm soft section
Wind ratingWind force 8; higher rating available on request
Bottom sealWeighted air-sealing cloth for uneven floors
Side sealBrushes inside the guide rails
Frame2.0 mm cold-rolled steel (4.0 mm motor mount), automotive paint or powder coated
MotorThree-phase 380V/50Hz, IP55, 0.75-1.5 kW, thermal and overload protection
ControlPLC with variable-frequency drive, 0.6-1.5 m/s, soft start
SafetyInfrared light curtain, auto-reverse, de-rail system, encoder limit
Opening optionsPull cord / remote / ground loop / radar
Power failureManual crank handle
Operating temperature0 C to +50 C

Related Products

Back to All Products