Cold Storage Engineering

Continuous tunnel freezers that take product from about 10°C at the infeed to -18°C at the outfeed in 20 to 100 minutes, built on a plate belt for wet and soft foods or a mesh belt for free-flowing IQF pieces. Nominal capacity is 1000, 1500 or 2000 kg per hour.

Key Features

  • Continuous freezing from about 10°C infeed to -18°C outfeed in 20 to 100 minutes
  • Plate belt for wet, soft and liquid-heavy products; mesh belt for free-flowing IQF pieces
  • Variable frequency belt drive, freezing time adjustable without a hardware change
  • Rigid polyurethane enclosure with stainless steel surfaces inside and out, built for HACCP cleaning
  • Nominal capacity 1000, 1500 or 2000 kg/h, quoted against a real product sample
  • Refrigerant R507, R744 or R717; two-stage reciprocating or screw package by site preference

Applications

  • Red meat and poultry portions
  • Fish fillets and scallops
  • IQF shrimp and seafood
  • Dumplings, pastry and dough
  • Diced vegetables and fruit
  • Dairy products and prepared meals

Tunnel freezers freeze product on a moving belt inside an insulated enclosure held near -35°C. Product enters at about 10°C, passes through the freezing zone, and leaves at -18°C. Belt speed sets the dwell time, so one machine covers a range of products without a hardware change.

Two belt types cover most duties. A plate belt carries wet, soft and liquid-heavy product such as fresh meat, fish fillets, scallops, dumplings and dough, because the flat surface holds the product and its moisture in place. A mesh belt lets cold air pass through the product bed and suits free-flowing pieces: peeled shrimp, poultry portions, diced vegetables, pastry and dairy. Pieces come out loose instead of frozen into blocks, which is what most export buyers ask for.

Belt speed comes from a variable frequency drive, so freezing time is adjustable between 20 and 100 minutes and can be tuned to the product rather than fixed at design. Product height on the belt is normally up to 120 mm. Infeed and outfeed direction, tunnel length and belt height can be built to the line layout.

The enclosure uses rigid polyurethane foam panels with stainless steel sheet inside and out, and a stainless frame, so surfaces wipe down and suit HACCP cleaning routine. Air coolers sit above the belt and a fan wall pushes air down through the product bed. Defrost is hot gas or water, selected by the site.

Nominal capacity is 1000, 1500 or 2000 kg per hour against a reference product. Real throughput moves with shape, thickness, water content and packing, so we quote capacity on a sample: product type, piece size, inlet temperature, target core temperature and hourly volume. Refrigerant is R507, R744 or R717 by site preference, and the freezing duty can be carried by a two-stage reciprocating or screw package.

Installation and commissioning are done by trusted installation teams, and our engineers can attend abroad. Spare parts and technical support stay available after handover.

Technical Specifications

Capacity & Models

ItemTF-1000TF-1500TF-2000
Nominal freezing capacity1000 kg/h1500 kg/h2000 kg/h
Cooling duty (evaporating -42°C)180 kW255 kW320 kW
Installed power30.1 kW44.1 kW59.5 kW
Overall dimensions (L x W x H)13360 x 4050 x 2700 mm17800 x 4250 x 2700 mm25860 x 4250 x 2700 mm
Belt width2860 mm (effective 2800 mm)3060 mm (effective 3000 mm)3060 mm (effective 3000 mm)

Belt Type

Plate belt for wet, soft and liquid-heavy products; mesh belt for free-flowing IQF pieces

Freezing Time

20–100 minutes, continuously adjustable through belt speed

Enclosure Temperature

About -35°C

Infeed / Outfeed Temperature

About 10°C in, -18°C out at the reference duty

Product Height on Belt

Up to 120 mm; other heights on request

Refrigerant

R507 / R744 / R717, by site preference

Power Supply

380V / 3 phase / 50 Hz

Enclosure Construction

Rigid polyurethane foam panels, stainless steel inner and outer skin, stainless frame and supports

Air Cooler Configuration

Ceiling air coolers above the belt with a fan wall for downward airflow

Defrost Method

Hot gas defrost or water defrost, selected by the site

Control System

PLC with touchscreen; belt speed, enclosure temperature and defrost cycles set from the panel

Working Environment

Best performance with the processing room below 20°C

Typical Application Industries

Meat and poultry processing, seafood processing, dumplings and pastry lines, diced vegetables and fruit, dairy, prepared meals

Notes

Capacity depends on product shape, size, water content and packing. Infeed and outfeed direction, tunnel length and product height can be customised to the line. Final duty is confirmed against a product sample.

Related Products

Blast Freezer
Cold Storage Engineering

Blast Freezer

Blast freezer rooms operating at -35°C to -40°C with freezing racks or blast tunnels, suited to individual quick freezing and large-batch rapid freezing of meat, seafood and prepared meals.

View Details →
Large Cold Chain Logistics Warehouse
Cold Storage Engineering

Large Cold Chain Logistics Warehouse

Large cold-chain warehousing projects with multi-level or single high-bay racking and zoned temperature control, configurable with AS/RS and WMS/WCS integration for cold chain parks, e-commerce warehouses and pharmaceutical cold chains.

View Details →
Controlled Atmosphere Cold Store
Cold Storage Engineering

Controlled Atmosphere Cold Store

Controlled-atmosphere fresh-keeping cold rooms operating at 0–4°C with adjustable 2–5% O₂ and 1–5% CO₂, equipped with a CA system and airtight room body for long-term storage of apples, kiwifruit and other produce.

View Details →
Back to All Products